line type ဖန္တီးျခင္း..

Filed under: by: ***Chan Chan*** (Mg Mine)

ခ်န္းခ်န္းရဲ့ စီဗုန္းမွာ ကိုZin MiNN ဆိုတဲ့ မိတ္ေဆြၾကီးက ခုလိုရိုက္သြားလို့ပါ..
ZiN MiNN: hey chan, do you know how to create new line type?
ေမးခြန္းကေတာ့ စာတေၾကာင္းပါပဲ .. ခ်န္းခ်န္း ေျပာျပရမွာက ေတာ့ မ်ားမွာမို့ ပိုစ္တခုတင္လိုက္ရပါတယ္...

တကယ္လို့ Auto CAD မွာ line type ေတြထပ္ဖန္တီးခ်င္တယ္ဆိုရင္ နဂို ရိွျပီးသား line type ေတြကို နမူနာ ယူဖတ္ရႈ့ေလ့လားထားသင့္ပါတယ္... အဲ့ဒိအတြက္ acad.lin နဲ့ acadiso.lin ကို ရင္းႏွီးကြ်မ္း၀င္ရိွေနဖို့လိုတာပါ..note pad ေလးနဲ့ဖြင့္ၾကည့္မယ္ဆိုရင္ ခုလိုေတြ့ရပါလိမ့္မယ္...
;;
;; AutoCAD Linetype Definition file
;; Version 3.0
;; Copyright (C) 1991-2007 by Autodesk, Inc. All Rights Reserved.
;;
;; Note: in order to ease migration of this file when upgrading
;; to a future version of AutoCAD, it is recommended that you add
;; your customizations to the User Defined Linetypes section at the
;; end of this file.
;;
*BORDER,Border __ __ . __ __ . __ __ . __ __ . __ __ .
A,.5,-.25,.5,-.25,0,-.25
*BORDER2,Border (.5x) __.__.__.__.__.__.__.__.__.__.__.
A,.25,-.125,.25,-.125,0,-.125
*BORDERX2,Border (2x) ____ ____ . ____ ____ . ___
A,1.0,-.5,1.0,-.5,0,-.5

*CENTER,Center ____ _ ____ _ ____ _ ____ _ ____ _ ____
A,1.25,-.25,.25,-.25
*CENTER2,Center (.5x) ___ _ ___ _ ___ _ ___ _ ___ _ ___
A,.75,-.125,.125,-.125
*CENTERX2,Center (2x) ________ __ ________ __ _____
A,2.5,-.5,.5,-.5

scroll ကို ေအာက္ဆံုးထိဆြဲၾကည့္လိုက္ရင္

;; User Defined Linetypes
;;
;; Add any linetypes that you define to this section of
;; the file to ensure that they migrate properly when
;; upgrading to a future AutoCAD version. If duplicate
;; linetype definitions are found in this file, items
;; in the User Defined Linetypes section take precedence
;; over definitions that appear earlier in the file.
;;

ဆိုတဲ့ စာသားေတြကိုပါေတြ့ရပါလိမ့္မယ္...

line type တခုစီအတြက္ စာ၂ေၾကာင္းစီပါ၀င္တာကို သတိထားမိမယ္ထင္ပါတယ္...
ပထမစာေၾကာင္းက *လိုင္းtype အမည္ နဲ့ , ရွင္းလင္းခ်က္ သေဘာ မ်ိဳးေလးပါ..
*linetype name[, description]
ဆိုလိုတာက ပထမစာေၾကာင္းကို အျမဲတန္း asterisk"*" နဲ့စပါတယ္..ျပီးရင္ linetype ရဲ့ Name ပါName မွာspace မပါရပါ၀ူး..description ကမေပးလဲရပါတယ္ ေပးမယ္ဆိုရင္ ေကာ္မာ ခံျပီး ေရးသြားႏိုင္ပါတယ္ စာလံုးေရ ၄၇ လံုးထိပဲလက္ခံပါတယ္.. ဒီေလာက္ဆို ပထမစာေၾကာင္းအတြက္ သိေလာက္ျပီထင္ပါရဲ့..
ဒုတိယစာေၾကာင္းက ေတာ့ linetype ရဲ့ defination ပါ.. A နဲ့အျမဲတန္းစပါတယ္..item တခုခ်င္းစီကို ေကာ္မာကုတ္ျပီးေရးသြားယံုပါပဲ.. ဒုတိယလိုင္းအတြက္ စာလံုးေရ ၈၀ ထိလက္ခံပါတယ္.
ဂဏာန္းေတြအတြက္ အဓိပၼါယ္ ဖြင့္ ပံုကေတာ့ အေပါင္းကိန္းဟာ dash ကိုိကုယ္စားျပဳျပီး တန္ဖို့းကေတာ့ အလ်ားေပါ့ခင္ဗ်ာ.. အႏုတ္ကိန္းကေတာ့ space ကို ကိုယ္စားျပဳပါတယ္ တကယ္လို့ dot အတြက္ဆိုရင္ေတာ့ zero "0" ပါ..ပံမွန္ဆိုရင္ေတာ့ acad.lin ရဲ့ေအာက္ဆံုးကေန မိမိအသစ္ထည့္လိုတဲ့ line type ကို ထည့္ျဖည့္ေရးသြင္းျပီး တခါတည္းသံုးႏိုင္ပါတယ္ ဒါမွမဟုတ္ note pad မွာေရးျပီး ႏွစ္သက္ရာ name.lin နဲ့save လုပ္သိမး္ျပီးလဲသံုးႏိုင္ပါတယ္...မိမိဖန္တီးခ်င္တဲ့ line design က ရႈပ္ေထြးေလ ေရးရတာ နဲနဲ လက္၀င္ေလပါပဲ..
အလြယ္တကူ ဖန္တီးႏိုင္မယ့္ ေနာက္တနည္းကေတာ့ express menu က mkltype ကိုသံုးတာပါ..

mkltype ကေတာ့ အင္မတန္အသံုး၀င္လွပါတယ္.. တကယ္လို့ ခပ္ရႈပ္ရႈပ္ေတြအတြက္ဆိုရင္ mkshape နဲ့လည္းတြဲဖတ္သံုးႏုိင္ပါတယ္...
ေက်နပ္ႏွစ္သိမ့္ႏိုင္မယ္လို့ေမွ်ာ္လင့္ပါတယ္..

ခင္မင္ေလးစားလ်က္
ခ်န္းခ်န္း(mg mine)

ေၾကာ္ျငာေတြမွာပါေလ့ရိွတဲ့ alum designer ရဲ့တာ၀န္ေတြ.....

Filed under: by: ***Chan Chan*** (Mg Mine)

AutoCAD CURTAIN WALL DESIGNER / DRAFTSMAN


To prepare the detailed engineering drawings, allocation and work order for curtain walling, façade/ Aluminium works in proper for further use by production and installation



KEY RESPONSIBILITIES of this JOB:

To review structural and architectural drawings and prepare detailed drawings for Aluminium and glazing work of the project in accordance with the complete scope of work in terms of quantity and specification in line with the BOQ for approval of Client/Consultant.


Make sure that structural check done for all necessary components (Glass, Aluminium Mullion, Transoms, Brackets etc.).


Effect any alterations on the Alunimium Shop drawings in coordination with the Project Managers as agreed.


Provide approved detailed Aluminium shop drawing to the production department for final production.


To ensure that the approvals of Drawings and sample materials obtained as per specified/approved within the time scale of programme.


Responsible for pre-ordering of materials in coordination with Sr. Designer (i.e. releasing the related information to Purchase Department) in time to meet the programme.


Preparing Work orders, Material allocation and Material Take off.


Preparing Aluminium Fabrication drawings and cutting list of profiles, Glass and Steel work order.


Provide approved detailed engineering drawings to installation for the proper coordination of different trades at the site.


Prepare ‘As Built’ drawings to the Client/Consultant for final handover of the Project.


Keeping record for all incoming and out going project related documents such as submission, rejection approvals.


IMPORTANT FEATURES OF THIS JOB:

· The job holder manager Draftsman/designer team, identifying the requirements of items and deadlines to complete target specified activities in the project schedule.

· Planning requires microscopic detailed study of a project, accuracy and precision are utmost important and critical for successful completion of a project with in the budget.

· As a result of complexity and diversity of projects there is a lot of stress in the job including time pressures, coordination and handling conflicting priority issues.


COMUNICATIONS REQUIRED:

Internal
Internal communications on daily basis with peers in other departments like Sr.

Designer, Production, Project Managers to meet deadlines of a project on a

timely basis.


External
Maintain an interface with valued clients on quality issues.


AUTHORITY AND REPONSIBILITY TO SOLVE PROBLEMS AND MAKE DECISIONS:

Provide a wide range of solutions, for complex issues; alterations in specification of items, quality of produced items etc.

Learngin AutoCAD CD vol ( 1,2,3 ) By ခ်န္းခ်န္း ( Mg Mine )

Filed under: by: ***Chan Chan*** (Mg Mine)

Volume ( 1 )
part 1 - http://www.sendspace.com/file/aqzcyq
part 2 - http://www.sendspace.com/file/9jhi9l
(OR)
part 1 - http://ifile.it/9qmla07/learning_acad_vol-1.part1.rar
part 2 - http://ifile.it/uh0ld9n/learning_acad_vol-1.part2.rar

Volume ( 2 )
part 1 - http://www.sendspace.com/file/r1mxp1
part 2 - http://www.sendspace.com/file/pvkr8f
(OR)
part 1 - http://ifile.it/vdjpeca/vol-2.part1.rar
part 2 - http://ifile.it/8uvht91/vol-2.part2.rar

Volume ( 3 )

part 1 - http://www.sendspace.com/file/jtegcm
part 2 - http://www.sendspace.com/file/7tbi9h
(OR)
part 1 - http://ifile.it/8zbhak5/learning_acad_vol-3.part1.rar
part 2 - http://ifile.it/kl4h5yj/learning_acad_vol-3.part2.rar

PASSWORD
WWW.Myanmarengineer.Org

ျမန္မာအင္ဂ်င္နီယာ ဆိုဒ္က ရာမညဖိုးလျပည့္ တင္ထားေပးတဲ့ လင့္ေလးေတြကို ျပန္ရွဲတာပါ....

To bcome a keyboard fighter.....

Filed under: by: ***Chan Chan*** (Mg Mine)

AutoCAD user ေတြဟာ key board အသံုးျပဳတဲ့အေပၚမူတည္ျပီး အသက္၀င္တယ္လို့ ခ်န္းခ်န္းေတာ့ ယူဆတယ္....(ဘာပဲျဖစ္ျဖစ္ရိွန္တာေပါ... :D...)

Drawing Navigation

Ctrl + Tab * Cycle Through Multiple Drawings: Much like Alt + Tab let’s you cycle through different applications, Ctrl + Tab lets you cycle through your open drawings.
Ctrl + Pg Up *
Ctrl + Pg Dn
Cycle Through Tabs: Want to switch between layout tabs without ever touching the mouse? Use Ctrl + Page Up or Ctrl + Page Down to cycle through the layout tabs in your drawing.
Use in Microsoft Excel to cycle through worksheets.
Ctrl + Directional Arrow Move Drawing Cursor

Drawing File Tools

Ctrl + N * Create New Drawing: Like running the QNEW command.
Ctrl + S * Save Drawing: aka the QSAVE command
Ctrl + Shift + S Save Drawing As: aka the SAVEAS command
Ctrl + O * Open Drawing
Ctrl + P * Plot the current drawing
Ctrl + Q Quit/Exit AutoCAD

AutoCAD Palettes & Palette Sets

Ctrl + 1 Properties Palette Set
Ctrl + 2 Design Center
Ctrl + 3 Tool Palettes
Ctrl + 4 Sheet Set Manager Palette Set
Ctrl + 6 db Connect Manager
Ctrl + 7 Markup Set Manager: For working with DWF markup sets
Ctrl + 8 Quick Calc
Ctrl + 9 Command Line: Toggles On/Off
Ctrl + 0 Clean Screen: AutoCAD for the true Keyboard Warrior

Drawing Editing Tools

Ctrl + C * Copy Uses arbitrary insertion point.
Ctrl + Shift + C Copy with Base Point Lets you enter or select an insertion point (this is my preferred method)
Ctrl + V * Paste
Ctrl + X * Cut Deletes from the drawing, but places items on your Windows clipboard.
Ctrl + Z * Undo Perfectly placed in the lower left corner of the keyboard, I hardly use U for undo anymore.
Ctrl + Y * Redo

Drawing Aids

Ctrl + A * Select All Selects every object in the drawing. Warning, do not combine with Delete key.
Ctrl + D Dynamic UCS [On/Off]
Ctrl + F OSNAP [On/Off] Or you can press F3
Ctrl + G Grid [On/Off]
Ctrl + L ORTHO [On/Off]
Ctrl + B Snap [On/Off]
Ctrl + W Object Snap Tracking [On/Off]
Ctrl + E Isoplane Used for 2D isometric drawings.
Ctrl + U Polar Tracking [On/Off]
Ctrl + M Repeat Last Command

MTEXT Editor

Ctrl + F Insert Field
Ctrl + R Find / Replace
Ctrl + Shift + Space Insert a Non-Breaking Space
Ctrl + Shift + U Change Text Case – Uppercase
Ctrl + Shift + L Change Text Case – Lowercase
Ctrl + Enter Exit MTEXT Editor and save changes.

Alum Field မွရခဲ့တဲ့ အေတြ့အၾကံဳသင္ခန္းစာမ်ား...-၅

Filed under: by: ***Chan Chan*** (Mg Mine)

အလူမီနီယမ္လို့ေျပာရင္ ခ်န္းခ်န္းအရင္ကသိသေလာက္ က L-angle ,.. U-channel , Flat bar, hollow, pipe, sheet (solid/composite) ဒီေလာက္ပါပဲ.. ဒီအလုပ္ကိုေရာက္ေတာ့ မွ profile ဆိုတာေတြကို စတင္ထိေတြ့တာပါ.. ခ်န္းခ်န္းတို့ျပည္တြင္းမွာ သစ္သား သုံးသမွ်ေနရာေတြကို စင္းကေတာ့ အလူမီနီယမ္သံုးတာေၾကာင့္ပါ... အဲ့ဒိမွာ thermal break ျပတင္းေတြ တံခါးေတြက ေတာ္ေတာ္ေလးစိတ္၀င္စားဖို့ေကာင္းပါတယ္.. ပံုေတြကိုၾကည့္ေတာ့ အလူမီနီယမ္ ပံုဆိုတာ သိၾကတဲ့အတိုင္း အတြန့္ေတြ အတက္ေတြနဲ့.. အေပါက္ေတြ အဖုေတြ အထစ္ေတြနဲ့ ၊ ျပီးေတာ့ တခုျခင္းစီကိုလိုက္ၾကည့္ျပန္ေတာ့လည္း ဘာေတြမွန္းကို မသိ... တခုနဲ့တခုခ်ိတ္ဆတ္လို့..(ဂမၻီရဆန္ေနလိုက္တာ) အလုပ္၀င္စကေတာ့ ဒီလိုပဲေတြးမိတာပါ. (ဒီprofile ကိုပဲ mullion ေခၚလိုက္ tramson ေခၚလိုက္နဲ့ေလ...ေက်နပ္စရာပဲ)
တကယ္ေတာ့ Building တခုရဲ့ window ေတြကိုေလ့လာၾကည့္ရင္ တူညီတဲ့ profile ေတြကိုသားသံုးေလ့ရိွတာေတြ့လာပါတယ္.. ထိုအတူပဲ မတူညီတဲ့ အေဆာက္အံုေတြအတြက္ မတူညီတဲ့ profile တြဲဖတ္ေတြေၾကာင့္ profile ပံုစံေတြအမ်ားၾကီးကို ခ်န္းခ်န္းေလ့လာမိခဲ့ရတာပါ.. အဲ့ဒိလို တြဲဖက္မႈေတြကို window system (microsoft ရဲ့ window နဲ့ေတာ့ မေရာေထြးေစခ်င္ပါ) လို့ေခၚတာပါ... ခ်န္းခ်န္းရဲ့ပထမကုမၼနီရဲ့ လုပ္ငန္းေဆာင္ရြက္မႈက အင္မတန္အတုယူဖြယ္ျဖစ္ပါတယ္.. လုပ္ငန္းက ေသးေသးေလးပါ.. လုပ္ေနသမွ် project ေတြကေတာ့ စင္းရဲ့ စံနဲ့ၾကည့္ရင္ကို ၾကီးလွပါတယ္.. လုပ္ငန္းမွာအဓိက လည္ပတ္ေနတာက ၀န္ထမ္း ၁၅ ေယာက္ေလာက္ပဲရိွတာပါ.. အဲ့ဒိထဲမွာ designer ကခ်န္းခ်န္းအပါအ၀င္ ၉ ေယာက္ ဒီဇိုင္းမန္ေနဂ်ာပါပါရင္ စုစုေပါင္း ၁၀ ေယာက္ပါ... စကၤာပူဆန္လွတဲ့ ကုမၼနီပါပဲ...project လက္ခံတာကစလို့ က်န္တဲ့အားလံုးကို အျပင္ကိုျပန္ခိုင္းျပီး ပြဲခမိ်ုးမ်ိဳးျမက္ျမက္ ယူတဲ့စနစ္ကိုက်င့္သံုးတာပါ.. profile ရဲ့ die design ကို ဂ်ပန္ႏိုင္ငံကေန အၾကံေပးခေပးျပီးရယူပါတယ္.. drawing ေတြကို approved ျဖစ္လို့ project စျပီဆိုရင္ designer တြက္ေပးထားတဲ့ profile qty နဲ့ အဲ့ဒိ designer ကပဲ ပစၥည္းမွာရပါတယ္.. ျပီးရင္ coating လုပ္တဲ့ဆီကို ပို့ရပါတယ္..coating ကျပီးျပီဆိုရင္ fabricator ေတြဆီပို့ရပါတယ္... ျပီးရင္ေတာ့ fabricator ေတြအတြက္ ဘယ္လို့ ျဖတ္ျပီးဘယ္လိုဆက္မယ္ဆိုတဲ့ work order/cutting list ေတြပို့ေပးရပါတယ္.. အဲ့ဒိကျပီးရင္ ၄င္းတို့ကပဲ site ကိုေရာက္ေအာင္တာ၀န္ယူပို့ေဆာင္ေပးရပါတယ္...(အဲ့ဒိ process အားလံုးက ဒီဇိုင္နာကပဲ ဖုန္းနဲ့ arrange လုပ္ရတာပါ) ျပီးရင္ေတာ့ ပုတ္ျပတ္ငွားထားတဲ့ installer ေတြကိုသံုးျပီးတပ္ဆင္ပါတယ္.. ျပီးရင္ ပုတ္ျပတ္ငွားထားတဲ့ မွန္သမားေတြကိုသံုးျပီး မွန္ေတြတပ္ဆင္ပါတယ္.. ခ်န္းခ်န္းကံေကာင္းခ်င္လို့လား ကံဆိုးခ်င္လို့ပဲလားေတာ့မသိပါ၀ူး.. ပုတ္ျပတ္ငွားထားတဲ့ site supervisor ေတြအဲ့ဒိလမွာ ခြင့္ယူၾကတာရယ္ site ကေလာေနတာရယ္ေၾကာင့္ ခ်န္းခ်န္း တာ၀န္ယူရတဲ့ project ေတြကို ခနရပ္ထားျပီး အဲ့ဒိsite ကို site supervisor/QC ခနေလာက္သြားေလာက္ေပးဖို့ သူေဌးက request လုပ္လာပါတယ္.. ေရငတ္တုန္းေရတြင္းထဲက်ဆိုတာလိုပါပဲ.. အဲ့ဒိဆိုဒ္ကို ခ်န္းခ်န္း ၂ ပတ္ေလာက္ supervise လုပ္ပါတယ္.. အဲ့ဒိေတာ့မွ ခ်န္းခ်န္းတို့ဆြဲေနတဲ့ window system ဆိုတာကို ေသေသခ်ာခ်ာသိနားလည္လိုက္တာပါ.. ေနာက္ျပီး အလုပ္သမားေတြလုပ္ေလ့ရိွတဲ့ ကိစၥေတြေရာေပါ့... ေတာ္ရံုျပသနာေလာက္ကို အေတြ့အၾကံုရိွတဲ့ အလုပ္သမားဟာ ဘယ္လိုေျဖရွင္းရမယ္ဆိုတာသိပါတယ္.. အဲ့ဒိေတာ့မွ ခ်န္းခ်န္းျပန္လည္ အမွတ္ရမိတာ အလုပ္စ၀င္တုန္းက ခ်န္းခ်န္းကို ဖုန္းေခၚခဲ့တဲ့ site supervisor ရဲ့ perforated panel ကိစၥပါ.. အဲဒိအခ်ိန္မွာသူနဲ့ခ်န္းခ်န္းရင္းနီးေနပါျပီ... ဒီေလာက္လြယ္လြယ္ေလး ကို ဘာေၾကာင့္ခ်န္းခ်န္းကိုေမးခဲ့တာလဲလို့သူ့ကိုေမးေတာ့ လြယ္တယ္္ဆိုတာသူလည္းသိတယ္တဲ့ ..သူဘာလုပ္ရမယ္ဆိုတာလည္းသိပါတယ္တဲ့..ခ်န္းခ်န္းကိုေမးရင္လည္းဒီလိုပဲလုပ္ဖို့ေျပာမယ္ဆိုတာသိတယ္တဲ့..
ေနာင္ျပသနာတခုခုျဖစ္လာရင္ သူ့တာ၀န္မျဖစ္ရေလေအာင္ confirm လုပ္တာဆိုပဲ... (ျပသနာမွန္သမွ်ဒီဇိုင္နာဆီသြား ... ဆိုတာမ်ိဳး ဟိဟိ)

Ps: Auto CAD topic ေအာက္မွာ လုပ္ငန္းအေတြၾကံုဆိုတာကိုေျပာေနရင္းနဲ့ auto CAD ဆိုတာမပါခဲ့ျပန္၀ူး ....(ဒါေပမယ့္လည္း ေလ့လာမယ့္သူေတြအတြက္ ေစတနာအျပည့္ပါပါတယ္ဗ်ာ...

ခင္မင္ေလးစားလ်က္
ခ်န္းခ်န္း(Mg Mine)

Alum Field မွရခဲ့တဲ့ အေတြ့အၾကံဳသင္ခန္းစာမ်ား...-၄

Filed under: by: ***Chan Chan*** (Mg Mine)

Shop Drawing ေတြဆြဲတာျပီးျပီဆိုရင္ေတာ့ drawing List , accessories list ေတြစီစဥ္ရပါမယ္..
a. Plan (scale 1:100/200)
b.Elevation (Scale 1:100 /200)
c. Schedule & Partial Elevation (Scale 1:20/30/40)
d. Detail (Scale 1:1, 1:2)
e. Extrusion List (Not to Scale)
f. Hardware List (Not to Scale)
g. Glass Tag
ျပီးရင္ Drawing Registration လုပ္ရပါမယ္... drawing ေတြဟာ ဘယ္ေန့မွာ submit လုပ္ခဲ့တယ္.. commented drawing ေတြကို ဘယ္ေန့က ျပန္လည္လက္ခံရရိွတယ္ .. revision ေတြေရာေပါ့...

-[size=12pt][b]PE Calculation [/b][/size](BCA ကလက္မွတ္ရ professional Engineer ရဲ့ structural calculation ပါ...)
ခ်န္းခ်န္းတို့ အလူမီနီယမ္ အလုပ္မွာ အဓိကလုိတဲ့ calculation ေတြက..
-CurtainWall
-Trellis
-Canopy
-Glass RAiling
-ေလွကားခြင္ေတြရဲ့ ေဘးမွာရိွေနတဲ့ window ေတြပါ.. (forth schedule လို့ sg ကသံုးေလ့ရိွပါတယ္၀
ပံုမွန္ကေတာ့ ဒီ items ေတြေလာက္ပါပဲ.. ဒါေပမယ့္ ထူးထူးျခားျခား ဒီဇိုင္းမ်ိဳးေတြအတြက္ကေတာ့ ျခြင္းခ်က္ေပါ့ခင္ဗ်ာ...

Material Take-Off (မိမိလုပ္ကိုင္ရမယ့္ Item တခုျခင္းစီအတြက္)
-Alum Extrusion
-Glass
-Hardware &Accessories (sliding door ေတြအတြက္ roller တို့၊ lock set တို့၊ တံခါးလက္ကိုင္ တို့ ၊ Multi/single point lockတုိ့.. စသည္)
-Fasteners (screw, bolt &nut, drive pin, revit, စသည္)
-Brackets

-Cutting List (fabrication drawing) or မိမိတို့လုပ္ငန္းရဲ့ fabricator ေတြဆီပို့မယ့္ Work Order/Job sheet
ခ်န္းခ်န္းရဲ့ပထမအလုပ္မွာ ဒီဇိုင္နာဟာ purchase requisition ကိုပါစီစဥ္ေပးရပါတယ္..
တကယ္ေတာ့ ဒီအပိုင္းက ပံုမွန္ဆိုရင္ material controller/ purchaser ေတြရဲ့အပိုင္းပါ...
ေနာက္ဆံုးအဆင့္ကေတာ့ လုပ္ငန္းျပီးေျမာက္မႈအေပၚတည္မွီျပီး As-Built Drawing ထုတ္ေပးရမွာပါ...

ဒါဟာခ်န္းခ်န္း ျပီးခဲ့တဲ့ ၂ ႏွစ္အတြင္း လုပ္ငန္းခြင္မွာ သိခဲ့သမွ်ပါပဲ... ခ်န္းခ်န္းေရးခဲ့သမွ်ကို ၾကည့္ရင္ auto CAD နဲ့အလုပ္လုပ္ေနတယ္ဆိုတာ ဆိုရရံုေလးပဲရိွပါတယ္... တကယ္ေတာ့ auto CAD တစ္ခုတည္းမွ်ေလာက္နဲ့ေတာ့ မလံုေလာက္ပါ၀ူး... မိမိလုပ္ဖူးတဲ့ အလုပ္မ်ိဳးမဟုတ္တာေၾကာင့္ အသစ္ဆိုတာမ်ိဳးနဲ့ ၾကံုလာရင္ ေကာင္းမြန္လ်င္ျမန္စြာ အတုျမင္ အတတ္ႏိုင္ဖို့ နဲ့ မိမိမသိဖူးဆိုတာေတြအရမ္းမ်ားေနတာမ်ိဳးမျဖစ္ေနဖို့ပါ...
designer ဆိုရင္ တာ၀န္ယူရတာအင္မတန္ၾကီးပါတယ္... site ထဲမွာ အမွားတခုခုျဖစ္ျပိးဆိုရင္ အရင္ဆံုးေခါင္းခဲရတာ ဒီဇိုင္နာပါပဲ... fabricator က ျဖတ္ေတာက္ေပးလိုက္တာ တိုေနတာ ၊ ရွည္ေနတာ၊ bended panel ေတြကို direction လြဲျပီး ေခါက္ေပးလိုက္တာ... ဒါမွမဟုတ္ main con ပိုင္းက structurေတြ setting out ေတြကို နဂိုသတ္မွတ္ထားျပီးသားနဲ့ အနဲငယ္ လိုသြားတာ ပိုသြားတာ အဲ့ဒါမ်ိဳးေတြဟာ ဒီဇိုင္နာရဲ့ ေခါင္းေပၚကိုလာမယ့္ ျပသနာေတြပါပဲ.. ဒီဇိုင္နာျဖစ္ျပီးဆိုရင္ေတာ့ အဲ့ဒိျပသနာမ်ိဳးေတြနဲ့ နပန္းလံုးရမွာကို ၾကိဳေတြးထားရပါမယ္... ခ်န္းခ်န္းတို့မ်ား ပထမအလုပ္မွာတုန္းက ဖုန္းoperator ဆီကို ၀င္လာတဲ့ ဖုန္းသံၾကားရင္ ကိုယ့္ဖုန္းမျဖစ္ပါေစနဲ့လို့ ဆုေတာင္းေနရတာ အေမာေပါ့ ဟဟား..ခ်န္းခ်န္းအလုပ္စ၀င္ျပီး ပထမအပတ္မွာပဲ ခ်န္းခ်န္းလုပ္ေပးလိုက္တဲ့ perforated panel ေတြအတြက္ site supervisor ဆိုတဲ့လူဆီက ဖုန္းလာပါတယ္.. ပထမဆံုး သူက တရုတ္လိုေတြေျပာခ်လိုက္တာ တရစပ္ပါပဲ.. ခ်န္းခ်န္းသိလိုုက္တာ ဆိုလို့ "တာတုန္းပန္(perforated panel) ဆိုတာနဲ့.. ကာနီနာ (၀သီအရဆဲတဲ့စကားတမ်ိဳးပါပဲ) ေနာက္ျပီး ၾကာလွ ( problem) " ဆိုတဲ့စကား၃ လံုးေလာက္ပဲဖမ္းမိပါတယ္... ခ်န္းခ်န္းက ေက်းဇူးျပဳျပီး ရင္းဂလိပ္လို့ေျပာႏိုင္မလား ဆိုေတာ့ ပိုဆိုးသြားပါတယ္.. ရင္းဂလိပ္လိုေျပာတာပါပဲ... ခ်န္းခ်န္းအင္မတန္ညံ့ခ်က္ကေတာ့ တလံုးမွကို မသိလိုက္ပါ၀ူး ဟဟား... မနည္းသူ့ကိစၥကို ျပန္ရွင္းယူလိုက္ရပါတယ္... ပထမဆံုးအလုပ္ကို ၀င္ျပီး ၁ပတ္မျပည့္ခင္ပထမဆံုး ဖုန္းေကာ ကေနစလို့ ခ်န္းခ်န္း နားလည္သိရိွလက္ခံလိုက္ရတာက ေျသာ္ငါလုပ္ရမယ့္ တာ၀န္က ဒီလိုပါလား ဆိုတာပါပဲ....

ခင္မင္ေလးစားလ်က္
ခ်န္းခ်န္း(Mg Mine)

Alum Field မွရခဲ့တဲ့ အေတြ့အၾကံဳသင္ခန္းစာမ်ား...-၃

Filed under: by: ***Chan Chan*** (Mg Mine)

Auto CAD ေခါင္းစဥ္ေအာက္မွာ auto CAD အေၾကာင္းတလံုးမွမပါေသးတဲ့အတြက္ စိတ္မရိွပါနဲ့ခင္ဗ်ာ...
ခ်န္းခ်န္းဒီအလုပ္ကိုစင္းေရာက္ျပီး ပထမဆံုးအလုပ္စေလွ်ာက္တဲ့ေန့မွာ ပထမဆံုး ရတဲ့အင္တာဗ်ဴး နဲ့ ပထမဆံုးရခဲ့တာပါ..
အင္တာဗ်ဴး၀င္ေတာ့ ခ်န္းခ်န္းပြင့္ပြင့္လင္းလင္းပဲေျပာျပပါတယ္... စင္းမွာလုပ္ေလ့ရိွတဲ့ alum field ကိုေတာ့အေတြ့အၾကံဳမရိွပါ၀ူးဆိုတဲ့အေၾကာင့္နဲ့ auto CAD ကိုေတာ့ professional ပါဆိုတဲ့အေၾကာင္းနဲ့... နဲနဲေလာက္အစပ်ိဳး ရွင္းျပေပးႏိုင္ရင္ ေကာင္းမြန္စြာ Handle လုပ္ႏိုင္မယ္လို့မိမိကုိယ္ကို ယံုၾကည္ခ်က္အျပည့္ရိွတဲ့အေၾကာင္း သူေဌးေက်နပ္ေအာင္ေျပာျပႏိုင္ခဲ့ပါတယ္.. ေလွ်ာက္တဲ့ ပိုဒ္စ္က Designer .. ဘာပဲျဖစ္ျဖစ္ ခ်န္းခ်န္း အဲ့ဒိအလုပ္မွာအဆင္ေျပေခ်ာေမြ့စြာလည္ပတ္ႏိုင္ခဲ့ပါတယ္.. ခ်န္းခ်န္းမွာရိွတဲ့ Auto CAD ဆိုတဲ့ လက္နက္ေလးနဲ့ ေအာင္ျမင္ရမယ္ဆိုတဲ့ စိတ္ဇြဲတခ်ိဳ့ေၾကာင့္ပါ.
မိမိလုပ္ကိုင္ရမယ့္နယ္ပယ္အေၾကာင္းသိျပီဆိုေတာ့ ပံုစတင္ဆြဲရပါျပီ...
ခ်န္းခ်န္းတို့ project အစမွာဆြဲျပီး archi ဆီ submit လုပ္.. approval ယူရပါတယ္.. အဲ့ဒိ Drawing ကို Shop Drawing လို့ေခၚပါတယ္..
ပံုမွန္ Alum Shop Drawing ေတြရဲ့ Priority ကေတာ့..
A- Window & Door
B- Curtain Wall & Cladding
C- Substation (Louver window & Door ) လုပ္ငန္းကိုေတာ့ဒီကစရပါတယ္..
D- AC Ledge
E- Railing
F- Trellis/Screen
F- Canopy
တကယ္လို့ Design လုပ္ေနတုန္းမေသခ်ာတဲ့ ၊ မရွင္းလင္းတဲ့ archi , structur ေတြကို main con ဆီ RFI ( request for information)ပ
လိုအပ္ရင္ Design period အတြင္းမွာ Die cutting လုပ္ရပါတယ္..
ဒါက Alum designer တစ္ေယာက္ ရဲ့ auto CAD ကိုသံုးျပီးအလုပ္လုပ္ရမယ့္ လုပ္ငန္းစဥ္ပါ...